CG Power and Industrial Solutions - R&D Role - Power Electronics (2-10 yrs)
Designation : Executive/Senior Executive
Grade : E1/E2
CTC : Between 4-13 lacs
Location : RTTE, Mandideep, Bhopal, MP
Reporting To : R&D Head
Qualification : BE/ B Tech/ M Tech in Electrical and Electronics
- Knowledge of SAP
- Good communication and presentation skill
- Experience 2 to 10years in relevant field
Roles & Responsibilities : Highly preferred
1. Should have at least 2 to 10 years of experience in power electronics design and development of DC-DC converters, Inverters, rectifiers, VVVF drives software.
2. Should know the losses calculation of IGBTs,Heat sink design, Junction temperature calculations
3. Should know the bus bar design for power converters,Snubber capacitors design, Gate drives design, Magnetics design
4. Should be able to simulate the power electronics designs in MATLAB or any equivalent simulation platform
5. Should be able to select components like IGBTs, Gate drivers, Capacitors for High power converters
6. Should know brake chopper design and control
7. Should be able to develop test setups for the converters in both low power and high power.
8. Should worked on design and development of EMI/EMC filter circuits for high frequency applications and high power environment
9. Should be knowledgable on all environmental tests need to be performed on control boards in traction grade
10. be knowledgable on all IEC standards of environmental tests need to be performed on control boards in traction grade
11. Should have practical experience in developing schematics,BOM generation, Component selection, Alternate parts selection of control boards
12. Should be able to simulate all the circuits and designs in Orcad, Pspice or any equivalent simulation platform
This job opening was posted long time back. It may not be active. Nor was it removed by the recruiter. Please use your discretion.
