Recruiter at Praxien Tech Pvt LTD
Views:231 Applications:1 Rec. Actions:Recruiter Actions:0
PC&IS Programming Engineer (5-9 yrs)
- Provide support for installation, commissioning, start-up and troubleshooting for various control and automation projects.
- Design Control System Architecture (CSA).
- Machine vision camera integration with PLCs.
- Design electrical & control panel layout, control schematic drawings and Bill of Material (BOM).
- Design, review and perform safety validation, safety maps, IQ/OQ, documents for new equipment installation at site.
- Perform multi-discipline and vendor co-ordination for new equipment installation.
- Review vendor & engineering documents as per project requirement.
- Design feasibility study design basis document and detail engineering technical documents Cable schedule, Device List/ Tag List for new equipment / machine.
- Understand the existing control system and provide support to reduce the current losses.
- Design control study / URD (User Required Document) for the PLC & HMI programming.
- Understand and Integrate Different systems in the plant.
- Provide support for PLC and HMI programming.
- Help the team understand the cause of loss based on historical data.
- Design and review technical documents, such as engineering information, for the fabricator/contractor's activities to be performed in sequence at the site for site clearance and new installation.
- Deliver complex, large-scale projects on time and within the budget in compliance with NEC, NFPA79, OSHA, S88, and PackML Standards.
Required Skills:
- PLC & HMI Programming:
Rockwell Softwares - Studio5000 & RSLogix5000, FTView Machine Edition and Site Edition, Connected Component Workbench
This job opening was posted long time back. It may not be active. Nor was it removed by the recruiter. Please use your discretion.
