Roles and Responsibilities :

1. Participate in Sales KOM and in which Client Purchase Order need to be reviewed completely

2. Checking of all Project Inputs, Specifications, Customer Specifications thoroughly and raise the clarifications points, fill the Risk Analysis, Project Specific points & get it closed from Customer before we prepare the deliverable drawings.

3. Review mechanism for risk analysis and mitigation

4. Review Site commissioning work

5. Check On-time drawing submission with 100% Quality.

6. Check all Customer Comments are implemented in deliverable drawings and Ensure all Customer requirements are fulfilled during execution of projects.

7. Respond to Customer query/Supplier Query immediately and confirm the

8. Delivery date of purchased materials.

9. Develop the software includes the HMI video screens, Logic development.

10. Prepare the BOM and distribute to internal departments.

11. On-time Material ordering request and Certification requirements to be specified clearly.

12. Read Manual /datasheets of new components installed in the Panel (or) skid& align the Documents accordingly.

13. Give transparent Feedback to Project manager to take immediate action.

14. Inspect the panel (or) skid during Production stage on daily basis and ensure

15. Provide the detailed list of modifications including engineering, materials lists etc.

16. Internal testing of the panels as per the internal test producers and send the

17. Inspection notification to be sent to the customer.

18. Carryout the Customer inspections/FAT without issues.

19. Closing the product non-conformities with the support of production team.

20. Ensure the inspections/FAT results with Customer satisfactions.

21. Prepare and upload the Certifications, Instruction manuals, drawings in the Supplier's portal.

22. Prepare and submit the test book which includes drawings, test procedure,

23. Certificates, test reports, etc. for the inspectors / customers during inspections/ FAT.

24. Prepare the wrap-up reports.

25. Training the Customer representatives on the products at the customer sites if required.

26. PLC programming. Scada screens to coordinate with the client and Manufacture the PLC panel.

27. Pre-Order Support for Bidding and Finalize the BOM & Scheme.

28. Review Project Specification/Customer Specification and Prepare the Critical Points.

29. Design Review to be performed for Key documents before release the drawings to Client.

30. Deviation or Additional requirements to be communicated to Client with Sales in the loop.

31. Ensure all Specifications are followed in the Panel Construction / Bill of materials

Desired Skills :

- Good interpersonal and communication skills

- Able to handle team, problem solving, planning and decision making

- Intelligence in numerical and statistical analysis

- Hand on expertise in PLC Programming

- Programming and configuration of, HMI, SCADA, AC/DC Drives & Servo drives from PLC.

- Review piping and instrumentation diagram

- Ensure manufacturing and production process meet national and international Standards