Senior Inspection Engineer - Oil & Gas (8-10 yrs)
- Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to the annual maintenance plan
- Identify the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, and corrosion under insulation).
- Assign damage mechanisms and corrosion rates to equipment based on process and environmental conditions to specify inspection types to be implemented at the next inspection.
- Identify likely failure mechanisms and expected rates of failure and advise on system recommendations through report reviews.
- Run criticality assessments for equipment following shutdowns to establish risk levels based on inspection results, Modifications to process, and modifications to equipment.
- Initiate inspection data reviews to confirm prediction credibility and establish appropriate inspection plans for the plant. Create a dynamic inspection plan with details of methods, location, extent, and frequency for each piece of equipment.
- Participates in equipment failure investigations using self-determined criteria for analysis to assess the damage, related costs, and reasons for failures to mitigate future risk in related equipment.
This job opening was posted long time back. It may not be active. Nor was it removed by the recruiter. Please use your discretion.
